Fitting Instructions
How to fit your Gotya Covered Seat Covers
- Unpack and separate seat covers into drivers and passenger side.
Fitting Back
- Remove headrest if necessary and fit headrest cover.
- Slide cover over the top of seat back and down.
- Replace headrest before sliding cover all the way down (cover should be a good tight fit).
- Take front bottom flap and push through seat to rear.
- Pull tight and attach to Velcro inside rear of cover.
Fitting Base
- Slide seat base onto seat ensuring it is clear of all levers or buttons.
- Push rear flap through seat to back.
- Pull both side flaps tight around seat base, ensuring clear of levers etc.
- Attach to centre flap with the attached Velcro.
- If included, pull straps through under seat clearing all tracks and fittings. Pull tight and fasten to opposite side - test movement of seat to ensure nothing is obstructed.
- As you use your vehicle, seat covers will mould to the shape of your seats.
- You may find you need to re-tension the Velcro fasteners occasionally.
Vehicles with Seat-fitted Airbags
- If cushions and back are joined, slide straps through the seam and fasten underneath.
- If airbags are in the seat, ensure the seat cover opening goes door side of the seat.